Oreck Air - Manual (Page 16)

16
Problem Check Solution
Unit does not turn
ON.
• Power Cord
• Cover • Plug in power cord.
• Make sure that the cover is
securely closed.
No air is blowing. • Power Cord
• Is the power On?
• Plug in power cord.
• Press and hold the POWER
button to turn On.
Airflow speed is
weak.
• Filters • Check the filters. Replace
if necessary.
• Were the plastic bags
removed from filters?
Color of Mood
Light is always the
same.
• Light Purple, Magenta,
or Red
• Blue
• Adjust the sensitivity of the
air sensor to insensitive or
standard.
• Adjust the sensitivity of the
air sensor to sensitive or
standard.
Unit does not
capture particles.
• Filters • Check the filters. Replace
if necessary.
• Unit may be damaged
Contact Oreck for service.
Unit still does not
operate properly.
Review all of the above Contact Oreck for service.
Trouble-
shooting
Service problems that appear to be major can often be solved
easily. You can be your own troubleshooter by reviewing, this
guide.
All other servicing should be done by an Oreck authorized
service center.