Osburn Stoves by SB I HYBRID-45 MF - Manual (Page 24)

ALARM CODES CHART
MESSAGE CORRESPONDING ERROR
Pressure switch error.
L-250 automatic high temperature switch, located under the auger.
L-250 manual reset high temperature switch, located beside convection blower.
Hopper is empty
Lighting error.
Hopper lid stay open more than 3 minutes.
Inverted polarity in power outlet.
Power outage
Igniter fuse blew up
SMOKE SMELL OR SOOT BUILD-UP
Because it is a wood-burning device, your Osburn Hybrid-45 MF may emit a faint wood-burning odor. If this increases beyond normal, or if
you notice an unusual soot build-up on walls or furniture, check your exhaust system carefully for leaks. All joints should be properly sealed.
Also clean your stove, following instructions in “MAINTENANCE”. If problem persists, contact your dealer.
TROUBLESHOOTING GUIDE 24