Optimus CD-8400 - Manual (Page 7)

7
Basic Operation
Warning: To protect your hearing, set the volume on your receiver or amplifier
to its lowest level before you load and play a CD.
Caution: Do not set the volume on your receiver or amplifier too high while
playing soft or quiet portions of a music program. Due to the CD changer’s wide
dynamic range, the speakers might be damaged if the music program includes
a sudden loud passage.
Using the Remote Control Many of the CD changer’s buttons also have a corresponding button on the
remote control, and you can use either the CD changer or the remote control to
control the function.
To use the remote control, point it at the infrared sensor on the left side of the
front panel and press the control button.
When the remote control’s operating distance reduces or if the remote control
stops working, replace the batteries.
Loading CDs in the Rack The multi-disc rack holds 100 CDs. The disc slots are numbered in clockwise
order, from 1 to 100, and can hold either 3-inch or 5-inch CDs.
Follow these steps to load up to 100 CDs in the slots.
1. Press POWER to turn on the CD changer. If necessary, repeatedly press
DISC NUMBER (or DISC on the remote) so the slot number you
want appears on the display.
2. Press UNLOAD to open the rack cover.
Note: The remote operates the CD
changer from up to 23 feet away and
within 30° of the front of the CD
changer.
Note: Always handle CDs by their
edges. Fingerprints and scratches on
a CD’s surface can prevent the laser
beam from correctly reading the digital
information. For more information, see
“CD Care Tips” on Page 18.
RANDOM
DISC
ASMS
UNLOAD BEST PREVIOUS DISC NUMBER
OPEN/
CLOSE
CD DECK SYNCHRO SYSTEM OSR
UNLOAD BEST PREVIOUS DISC NUMBER
OPEN/
CLOSE
CD DECK SYNCHRO SYSTEM OSR