Optimus CD-8400 - Manual (Page 8)

8
Basic Operation
3. Hold the CD vertically and insert it into the CD slot, label side to the left.
4. To load more CDs, repeatedly press DISC NUMBER (or DISC on
the remote) so the desired rack number appears on the display. Then
repeat Step 3.
5. When you finish loading the desired CDs, press OPEN/CLOSE to close the
rack cover.
To remove a CD, select the slot number of the disc you want to remove, then
press
UNLOAD . The rack rotates the selected disc slot to the front. When the
rack cover opens, remove the selected CD. Press OPEN/CLOSE to close the
rack cover.
Cautions:
• Do not try to manually open the rack cover; only use OPEN/CLOSE .
• Do not load anything other than 5-inch or 3-inch CDs into the slots. This
could damage the CD changer.
• Do not use an adapter for 3-inch CDs. Also, avoid placing 3-inch CDs
between 5-inch CDs as this makes it hard to remove the 3-inch CDs.
• The CD changer does not play with the rack cover open.
Loading a CD in the
Single Play Slot The single play slot lets you easily load a single CD. To load a CD in the single
play slot, press
SINGLE PLAY/ACCESS . The CD changer turns on if it was turned
off, and rotates the rack so the single play slot comes to the loading position.
Insert the CD with its label to the left. Then press
SINGLE PLAY/PLAY to start
playing.
To remove a CD from the single play slot, press SINGLE PLAY/ACCESS . The
rack rotates the single play slot to the front. When the rack cover opens, remove
the CD.
The single play slot is numbered as “0” and is located between discs 100 and 1.
You can access this slot by pressing
DISC NUMBER when the display shows
100 , or DISC NUMBER when the display shows 1 . You can also reach to the
single play slot by pressing 0 on the remote control. The display shows the disc
number as P0 .
Using the Demo The demo showcases the features of your CD-8400 and its display. To turn on
the demo, press
within 1 second of turning on the CD changer. To turn
off the demo, press any button.
Notes:
• You can use OPEN/CLOSE to open
the rack cover and remove the disc if
the disc to remove is already at the
front of the rack. The display shows
HOLD while the rack cover is open.
• You can open the rack cover even
while a disc is playing. Hold down
OPEN/CLOSE until the display shows
OPEN . The rack cover opens and the
display shows HOLD . In this case,
the rack does not rotate and you can-
not use
UNLOAD , SINGLE PLAY/
ACCESS , or DISC NUMBER .