Oregon Scientific Color Weather Station AWS888N - Manual (Page 10)

EN
10
CLOCK SETTING
Auto-synchronization should be deactivated before
you manually set the clock. To do this, follow the
instructions stated below and turn the RF CLOCK
function OFF in CLOCK SETTING mode.
1. From the HOME MENU
access the GENERAL
SETTING mode.
Press / to select
CLOCK SETTING,
then press ENTER.
2. CLOCK SETTING mode
3. Choose the settings that need to be adjusted:
TIME Set Hour and Minute
YY-MM-DD Set Year, Month and Date
FORMAT Set 12 or 24 hour format and
Analog, Digital or Classic Clock
display format
RF CLOCK Set Auto synchronization on or off
2 nd ZONE-
OFFSET
Set 2 nd zone-time
Exit Return to previous page
• Press / to choose a setting (the selected
item will flash).
• Press ENTER to start making adjustments.
• Press / to change values.
• Press ENTER to confirm changes.
TIP: Press HOME to return to MAIN MENU.
2 nd ZONE-OFFSET
You can offset current local time to correspond with
the time from another region (2
nd zone).
For example, if the current local time is 1:30pm and
the time in another region is 3:30pm, you should
adjust the 2
nd ZONE-OFFSET to +02 to compensate.
AWS888N_En_R2 8/16/04, 4:28 PM 10