Oregon Scientific Color Weather Station AWS888N - Manual (Page 17)

17
EN
CLOCK ALARM DISPLAY MODE
This is a display mode that presents the time, date,
and alarm one of the following ways:
*In Classic display mode, the hourly chime is animated
with a cuckoo bird and cuckoo sound.
You can set which clock is displayed from the
CLOCK SETTNG mode. Access the FORMAT option
to toggle between Digital, Analog and Classic views.
RESET SYSTEM
The RESET buttons are located on the back of the
main unit and in the battery compartment for the remote
unit. Press these buttons whenever you change the
batteries, or whenever performance is not behaving as
expected (e.g., unable to establish radio frequency link
with remote unit or automatic clock, etc.).
After resetting the system all system
information will be erased and returned to factory
defaults. The main unit will also check battery
condition.
NOTE
NOTE
Analog Digital Classic*
DEFAULT SETTINGS
1/1/2003
Time 00:00:00 (24 hour format)
or 12:00:00 am (12 hour
format)
Clock display Time-second display mode
Daily/weekly alarm Alarm disabled
Sleep Mode Sleep start at 12:00 a.m.
and sleep end at 6:00 a.m.
& function disabled
Silence Mode Off
Weather Partly cloudy
Pressure display Current pressure
Altitude 0m
Thermo-hygro display Current indoor
Indoor temperature trend Steady
Indoor humidity trend Steady
Sensor search Enabled
Receive RF clock Enabled
Press RESET to restore all settings to factory defaults.
Date
AWS888N_En_R2 8/16/04, 4:29 PM 17