Oregon Scientific Color Weather Station AWS888N - Manual (Page 9)

9
EN
MAIN UNIT SENSOR SEARCHING
Press and hold SEARCH for 2 seconds to manually
activate sensor searching. The search icon will blink
until the remote signal is found or the search period
times out.
Search for channel signal (shown in Temp-Hygro-
Pressure mode):
Searching
for Sensor
Sensor
found
No sensor
found
Search for RF clock signal (Shown in Clock-Alarm
mode). The selected sensor's channel will be shown
in the house display window:
NOTE The sensor search will automatically start
when the main unit is reset.
GENERAL SETTINGS MODE
All settings and display options for this product are
accessible from the MAIN MENU.
NAVIGATING THROUGH MAIN MENU
To access
MAIN MENU
from any
screen press
HOME.
Press
or
to highlight a
desired option
then press
ENTER to
activate it.
CHANGING SETTINGS
1. Press or to highlight the option you
wish to change.
2. Press ENTER to select it.
3. Use the UP or DOWN buttons to
change values.
4. Press ENTER confirm changes.
TIP: Pressing the will return you to the previous
screen.
Strong clock and
remote signal
Weak clock and
remote signal
No signal
If no signal is found, check remote unit batteries.
AWS888N_En_R2 8/16/04, 4:28 PM 9