Optoma HD3000 - Manual (Page 24)

HD3000 User’s Guide
Professional Video Scaler and Color Management System
HD3000 User’s Guide 4
3. Press “Enter” or “g” to enter category. The OSD shows a signal submenu according to
the current signal.
Signal
Type
Pedestal
Color Space
Horizontal
Vertical
Frequency
Phase
Auto
0 IRE
Auto
0
0
0
0
4. Press “Enter” or “g” to enter item. A bar appears according to the current signal, as
shown on the next page.
5. For Type, Pedestal, and Color Space, use “f” & “g” to select the desired choices, and
then press “Enter” to confirm. For the rest of the items, use “f” & “g” to adjust the slider
bar to achieve the desired effect, then press “Enter” to confirm. Please refer to tables A &
B for the range of available values.
Type AUTO YPbPr RGBHV RGBs
Type
This function is only for BNC signals. The default choice, AUTO, automatically detects the signal type.
The other three choices (YPbPr, RGBHV, RGB) force the HD3000 to display the selected signal type.
Pedestal DVI-PC DVI-Video
Pedestal
Black level control: All connected devices besides HDMI can choose between 2 presets: 0 IRE or 7.5 IRE.
HDMI devices are given the choice of DVI-PC or DVI-Video; DVI-PC corresponds to 0 IRE and
DVI-Video corresponds to 7.5 IRE.
Color Space AUTO SDTV HDTV
Color Space
The default choice, AUTO, automatically detects the color space used. The other two choices
(SDTV, HDTV) force the HD3000 to use the color space mapping associated with SDTV or HDTV.