Optoma HD3000 - Manual (Page 35)

HD3000 User’s Guide 35
HD3000 User’s Guide
Professional Video Scaler and Color Management System
Image Shift Adjustment
The HD3000 has the ability to adjust the image position and size to optimize its location on
your display by using both an “Image Shift” and “Image Zoom” feature.
The function “Image Shift” can shift the input image up, down, left and right, up to 100 pixels
in each direction.
1. Press the “Menu” button on the remote.
. Use “h” or “i” to highlight the DISPLAY category and then press “Enter” or “g” to select
this category. Use “h” or “i” arrow keys to highlight the “Image Shift” adjustment item:
IMAGE
Display
Select Enter Enter Menu Back
Format
Edge Masking
H Zoom
V Zoom
Image Shift
16:9
off
100%
100%
Off
DISPLAY
SYSTEM
SETUP
3. Press “Enter” or “g” to enter this adjustment item. A small adjustment bar is shown, and
the user may use the “Up”, ”Down”, “Left” and “Right” keys to move the image to best fit
the display device screen.
4. Press the “Shift” button on the remote control to vertically shift the image as well. No
horizontal shift is possible from the remote control.