Optoma HD3000 - Manual (Page 45)

HD3000 User’s Guide 45
HD3000 User’s Guide
Professional Video Scaler and Color Management System
Edge Enhancement
There are 5 pre-set modes and one user mode for advanced edge enhancement filter. You
can easily switch between the modes to achieve different effects.
1. Use “h”, “i” arrow keys to select the “Edge Enhancement” adjustment item, and then
press “Enter” key or “g” key to enter this adjustment item. The Menu disappears and a
small adjustment bar is shown (as shown below).
IMAGE
IMAGE I ADVANCED
Select Enter Enter Menu Back
Noise Reduction
Gamma
Color Temp
Image Mode
Edge Enhancement
Color Vividness
B/W Extension
Demo
Reset
0
1
Warm
Film
Off
Off
Off
Off
DISPLAY
SYSTEM
SETUP
. Use “f”, “g” arrow keys to select default modes.
3. For User mode adjustment, put cursor on “User”, and then press “Enter” key to enter
this adjustment item. The Menu disappears and a sub adjustment menu is shown (as
shown below).
Edge Enhancement Off 1 2 3 4 5 User
4. Use “h”, “i” arrow keys to select and choose “Edge enhancement” bar, and then press
“f”, “g” arrow keys to adjust different enhancements.
5. User can select and setup different settings for each mode (1 to 5) in “User” option and
adjust submenu shows as the following: When user chooses one mode and presses
“Enter” to see the original settings of each item; user may then adjust the value per the
original setting of each mode.