Optoma HD3000 - Manual (Page 31)

HD3000 User’s Guide 31
HD3000 User’s Guide
Professional Video Scaler and Color Management System
ISF Modes
For care-free operation, HD3000 comes with ISF Modes.
The HD3000 is designed to offer exceptional performance “out of box”; but since lighting and
other factors can affect the performance of your display device, Optoma offers ISF calibration
capability. After the ISF calibration, the user can simply switch among “ISF Day” and “ISF
Night” modes to have certified image effects.
Day and Night modes are locked at the factory and require certified ISF calibrators to unlock
and set-up. Certain factors cannot be set at the factory due to variables during the setup.
Professional calibration of Day and Night modes allow for the appropriate setting of contrast,
tint, sharpness, color levels and other parameters to exactly match the environment where the
display device is used. There are also three user modes which can be modified by the user,
allowing a total of five settings per signal/connection to match every condition.
For ISF calibration, please visit www.imagingscience.com to find a certified ISF technician in
your area.
1. To select an ISF mode, press “Menu” button and use “Enter” or “g” to enter the IMAGE
category, then use “h” or “i” arrow keys to highlight “Mode”. Press “Enter” or “g” to enter
ISF Mode menu.
. Use “h” or “i” to select the desired mode.
ISF Day
ISF Night
User 1
User 2
User 3
Mode