Olympus XZ-1 - Manual (Page 36)

36 EN
The default settings of the function are highlighted in
.
Choosing a focus mode/
shooting close-ups
Choose how the camera focuses. Choose a macro mode
to focus at short ranges when shooting close-ups.
1
Press H ( &) and then press the INFO button.
2
Use HI to highlight an option and press A
to select.
To view the AF target display, press the INFO
button.
Option Description
AF
When the shutter button is pressed
halfway, the camera focuses once
and then locks focus. Once the
camera has focused, a beep sounds
and the AF confi rmation mark and
the AF target mark light.
Macro
This enables shooting as close as
10 cm/3.9 in.
*1 (30 cm/11.8 in. *2 ) to
the subject.
Super Macro *3
This enables shooting as close as
1 cm/2.5 in. to the subject.
AF Tracking
The camera focuses continuously to
track moving objects.
MF
Focus manually at the desired
distance.
*1 When the zoom is at the widest (W) position.
*2 When the zoom is at the most telephoto (T) position.
*3 The zoom is automatically fi xed.
The fl ash (p. 37) and zoom (p. 22) cannot be set
during super macro shooting.
●
Continuous focus on moving subjects Continuous focus on moving subjects
[AF Tracking]
[AF Tracking]
1 Frame a picture with the subject positioned in the AF
target mark and press the shutter button halfway.
2 Once the camera has detected the subject, the AF
target mark automatically tracks the subject and the
camera continuously adjusts focus while the shutter
button is pressed halfway.
3 To cancel AF tracking, release the shutter button.
Depending on the subject or shooting conditions, the
camera may be unable to lock focus or track subject
movement.
Zooming in on the focus point [MF] Zooming in on the focus point [MF]
1 Press the INFO button to zoom in on the center of the
display.
2 Use the wheel controller to focus manually.
FG can be used in place of the wheel controller.
3 To cancel manual focus, press the INFO button.
●
Using Shooting Functions Using Shooting Functions