Olympus XZ-1 - Manual (Page 72)

72 EN
Date and time function Date and time function
“Date and time settings return to the default setting”.
If the batteries are removed and left out of the
camera for about a day
*2 , the date and time
settings return to the default setting, and must
be reset.
*2 The time until the date and time settings return to
the default setting varies depending on how long
the batteries have been loaded.
“Date, time, time zone, and language” (p. 18)
Miscellaneous Miscellaneous
“The camera makes a noise when taking pictures”.
The camera may activate the lens and make a
noise even if no operation is performed. This
is because the camera automatically performs
actions of auto focus as far as it is ready to shoot.
Error message
When one of the messages below is displayed on the
monitor, check the corrective action.
Error message Corrective action
Card Error
Card problem
Insert a new card.
Write Protect
Card problem
The card write-protect switch is
set to the “LOCK” side. Release
the switch.
Memory Full
Internal memory problem
Insert a card.
Erase unwanted images.
*1
•
•
Card Full
Card problem
Replace the card.
Erase unwanted images.
*1
•
•
●
●
Error message Corrective action
Power Off
Format
Card Setup
Set
Card problem
Use
FG to select [Format], and
press A. Next, use FG to select
[Yes], and press A. *2
Power Off
Memory Format
Memory Setup
Set
Internal memory problem
Use
FG to select [Memory
Format], and press A. Next, use
FG to select [Yes], and press
A. *2
No Picture
Internal memory/Card problem
Take pictures before viewing them.
Picture Error
Problem with selected image
Use photo retouch software, etc.
to view the image on a computer.
If the image still cannot be viewed,
the image fi le is corrupted.
The Image Cannot
Be Edited
Problem with selected image
Use photo retouch software, etc. to
edit the image on a computer.
Battery Empty
Battery problem
Charge the battery.
No Connection
Connection problem
Connect the camera and computer
or printer correctly.
No Paper
Printer problem
Load paper into the printer.
No Ink
Printer problem
Refi ll the ink in the printer.