Olympus XZ-1 - Manual (Page 81)

81 EN
Flash control can only be performed by manually setting the fl ash to the ISO sensitivity and aperture values selected
with the camera. Flash brightness can be adjusted by adjusting either ISO sensitivity or aperture.
Use a fl ash with an angle of illumination suited to the lens. Angle of illumination is usually expressed using 35-mm
format equivalent focal lengths.
Conversion lens (sold separately)
Conversion lens Conversion lens adapter
TCON-17 CLA-12
Microphone set (SEMA-1) (sold separately)
Produces higher-quality recordings than the camera’s built-in microphone. The microphone can be placed at a distance
from the camera to avoid recording ambient sounds or wind noise. Third-party commercial microphones can also be
used depending on your creative intent (power supplied via φ3.5 mm stereo mini-plug). The microphone set attaches to
the camera hot shoe and accessory port.
Microphones connected directly to the microphone adapter will cast shadows in photographs taken using the
camera’s built-in fl ash. This can be prevented by connecting the microphone using the supplied microphone cable.
Remote cable (RM-UC1) (sold separately)
Use when the slightest camera movement can result in blurred pictures, for example for macro or bulb photography. The
remote cable attaches via the camera multi-connector.
Water-resistant protector (PT-050) (sold separately)
Use when taking photographs under water.
“To take underwater photos” (p. 32), “To lock the focus distance for underwater shoots (AF lock)” (p. 32),
[Underwater] (p. 40)
•
•