Olympus XZ-1 - Manual (Page 60)

60 EN
Viewing images on a TV [TV Out] Viewing images on a TV [TV Out]
x (Setup menu) X TV Out
Different countries and regions use different video signal standards. Before connecting the camera, choose a video
signal standard that matches that used by the TV.
Submenu 2 Submenu 3 Application
Video Out
NTSC
Choose when connecting the camera to TVs in countries or regions
where NTSC is used (e.g., North America, Taiwan, Korea, and Japan).
PAL
Choose when connecting the camera to TVs in countries or regions
where PAL is used (e.g., Europe and China).
HDMI Out 480p/576p / 720p / 1080i Choose an HDMI output format.
HDMI Control
Off Playback operations are performed using camera controls.
On Playback operations are performed using the TV remote control.
Camera factory defaults vary with the country or region of sale.
Viewing images on a TV Viewing images on a TV
Using an AV cable
1
Match the camera video signal format ([NTSC]/[PAL]) to that used by the TV.
2 Connect the camera to the TV.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
AV cable (supplied)
Multi-connector
Connector cover