Oki 5700 - Manual (Page 39)

English
Installation 3-11
Clock Adjustment
To ensure that the correct date and time appear on transmitted and received
faxes, and also to enable use of the many time-sensitive features of your
fax machine, the system clock needs to be set. This section describes how
to set the correct date (mm/dd/yyyy or dd/mm/yyyy format set by product
region) and time (00:00-23:59). Speed access no. 00.
1 Press MENU/EXIT to enter the system menu.
2 Input speed access no. (00). The time and date prompt will be
displayed.
3 Input current date (xx/xx/xxxx) and time (hh:mm) using numeric keys
(0-9), then press ENTER.
4 Press MENU/EXIT to return to standby mode.
Note:
The input of invalid data (for example, the wrong date format was
used) will render the ENTER key ineffective.
Facsimile ID
The machine will use the information input under this function to identify
itself during communications. In most countries the programming of this
information into the machine before use is a legal requirement. In certain
countries this information must be set by the installation engineer and is
not user adjustable. In such cases the adjustments described here may not
appear in the standard menu.
TSI/CSI: The telephone number assigned to this machine. It will be
printed on the top of faxes sent and appear on the displays and reports of
other facsimile machines communicated with. A TSI/CSI can be up to 20
characters long. Speed access no. 01.
Sender ID: A descriptive title (usually the machine location or name of
company or office). This information will be printed at the top of every fax
sent. Up to 32 characters can be entered; the first 16 characters of the
Sender ID are also assigned as Personal ID, which may appear on the
displays or reports of other facsimile machines communicated with. Speed
access no. 02.
1 Press MENU/EXIT to enter the menu.
2 Input speed access no. 01 (TSI/CSI), and wait for the TSI/CSI prompt
message to appear.