Opticon LH2 - Manual (Page 80)

Hardware Settings
80
Hardware Settings
81
Command Name: Left Key Programming
Usage: Programs the left key to different options.
Description: This command allows you to program the left key to perform different
functions. You can program the key so that it can make use of a
different imager ( Near / Far ) to read a barcode. This function is
useful while doing the initial setup.
Default: The key is set to read with Both the imagers.
Programming Code: Serial Command:
Read with Both Imagers (Default) P%3a3<┘
Options:
Programming Code:
Serial Command:
Read with Far-Field Imager only P%3a6<┘
Read with Near-Field Imager only P%3a5<┘