Opticon LH2 - Manual (Page 81)

Hardware Settings
80
Hardware Settings
81
Command Name: Right Key Programming
Usage: Programs the right key to different options.
Description: This command allows you to program the right key to perform
different functions. You can program the key so that it can make use
of a different imager ( Near / Far ) to read a barcode. This function
is useful while doing the initial setup.
Default: The key is set to read with both the imagers.
Programming Code: Serial Command:
Read with Both Imagers (Default) P%393<┘
Options:
Programming Code:
Serial Command:
Read with Far-Field Imager only P%396<┘
Read with Near-Field Imager only P%395<┘