Oricom W1 User Manual
Page 18
18
OTHER FEATURES
Key lock
Press and hold
during standby to lock the keypad.
appears
whenever keypad is locked.
When the keypad is locked, you can still answer an incoming call by
pressing
. During the call, the keypad functions as normal. When
the call is ended, the keypad will be locked again.
To unlock the keypad, press any key and then press
OK
when you see
PRESS OK.
Shortcut to turn handset ringer on/off
You can use this shortcut to turn on/off the handset ringer when the
phone is in standby. Simply press and hold
.
appears whenever
the handset ringer is turned off.
Message waiting indication
You need to subscribe to a voice mail service (eg Telstra Message bank)
to use this feature. When you receive a voice message from your
telephone company,
will appear on the display. After you’ve listened
to all the new messages,
will turn off. You can also turn it off by
pressing
EXIT
for 2 seconds during standby.
Paging the handsets
You can page or locate the handsets by pressing
on the base. All
handsets registered to the base will produce the paging tone for 30
seconds and the screen displays blinking “oooo”.
You could stop the paging by pressing any key on each handset or
pressing
on the base again.
Out of range warning
When you are talking on the phone and you take the handset too far
away from the base, you’ll hear an alert tone through the receiver. You
should bring the handset back in range with the base. Failing to do so
will result in the call being disconnected.
When the handset is too far away from the base during standby, you will
see
flashing.