Oricom W1 - Manual (Page 19)

19
MULTI-HANDSET OPERATION
You can use these useful features if you have 2 or more handsets
registered to the base.
Answering an internal call
When you receive an intercom call, your handset will ring with
blinking. You can see the calling handset number on the screen.
If you press when the phone is ringing, the handset ringer will be
turned off for this incoming internal call.
Press to answer.
Making an internal call
When the phone is in standby,
1. Press
INT . turns on and you’ll hear an internal dialing tone.
2. Press the number of the handset that you want to call.
(Or you can press the handset number first, followed by
INT .)
You will hear a busy tone if the other handset is not available.
To end an internal call, press or return the handset to the base
cradle.
You will be alerted with short beeps if you receive an external call during
your intercom. Caller information will be displayed if it is available. You
need to end the intercom first before you can answer the external call.
During an external call
Inquiry call
1. Press
INT to put the external line on hold.
2. Press the handset number that you want to call.
3. After the other handset has answered, you can press
INT
repeatedly to switch between the external line and the intercom.
If the other handset does not answer, press INT again to cancel the
attempt and return to the external line.
Call transfer
While you are in an inquiry call with the other handset, press or
return the handset to the base cradle. The call has now been transferred.
Conference call
While you are in an inquiry call with the other handset, press and hold
CONF to set up a conference call between the external line and the 2
handsets.