Installation – Olicom 2 User Manual
Page 8
SY-P4I865PE Lite DRAGON 2 Quick Start Guide
8
Har
dw
ar
e
Install
atio
n
2
2
Installation
To avoid damage to your Motherboard, please follow these simple rules
while handling this equipment:
Before handling the Motherboard, ground yourself by touching on to an unpainted
portion of the system's metal chassis.
Check the mainboard for damage. If any component appears to be loose or
damaged contact our customer service center immediately.
Follow the directions in this section which are designed to help you use a quick and correct
method to install your new SY-P4I865PE Lite DRAGON 2 Motherboard. For detailed
information, please refer to the SY-P4I865PE Lite DRAGON 2 Motherboard User's
Manual and Technical Reference online manual on the CD-ROM that came with your
Motherboard.
Gather and prepare all necessary components to complete the installation successfully:
Socket mPGA478 processor with built-in CPU cooling fan (boxed type) (CPU Vcore
higher than 1.6 volts is not supported)
DDR RAM module (s)
Computer case with adequate power supply unit (at least 350W, ATX 12V
approved)
Monitor
Keyboard (PS2 or USB)
Pointing Device ( Mouse, USB or PS2)
Speaker(s) (optional)
Disk Drives: HDD, CD-ROM, Floppy drive…
External Peripherals: Printer and Modem (optional)
VGA Card (AGP, PCI)