Omega Vehicle Security CN3271 Series - Manual (Page 15)

12
C 4 C 4 C 4 C 4 C 4 = == == Shutdown memory Shutdown memory Shutdown memory Shutdown memory Shutdown memory
0 = The shutdown condition will be saved (at
next power up it will be reactivated)
1 = The shutdown condition will be lost in
case of power down
C5 = C5 = C5 = C5 = C5 = Time Constant of the Filter applied Time Constant of the Filter applied Time Constant of the Filter applied Time Constant of the Filter applied Time Constant of the Filter applied
to the Measured Value for Limit
to the Measured Value for Limit to the Measured Value for Limit to the Measured Value for Limit to the Measured Value for Limit
A c t i o n .
A c t i o n . A c t i o n . A c t i o n . A c t i o n .
Range: From 0 (filter OFF) to 8 seconds
Note: First order filter with selected time
Constant.
P 1 P 1 P 1 P 1 P 1 = Alarm Function = Alarm Function = Alarm Function = Alarm Function = Alarm Function
(Skipped when the option is not available)
nonE = Not provided
AL.P = Process alarm
AL.b = Band alarm
AL.d = Deviation alarm
When C1 = Hi.Lo, “AL.b” and “AL.d” are not
available.
P 2 P 2 P 2 P 2 P 2 = == == Alarm configuration Alarm configuration Alarm configuration Alarm configuration Alarm configuration
(Skipped if option is not available or P1 = none)
H.A. = High alarm with automatic reset
L.A. = Low alarm with automatic reset
H.A.Ac = High alarm with automatic reset and
"Silence" function.
L.A.Ac = Low alarm with automatic reset and
"Silence" function.
H.L. = High alarm with manual reset
L.L. = Low alarm with manual reset
HS
(Limiter
Hysteresis)
ON
Relay OUT 1
OFF
ON
OFF
“Reset” LED
Flash
Steady
Upper display FLASH FLASH
Su
(Limiter
threshold)
HS
(Limiter
Hysteresis)
ON
Relay OUT 1
OFF
ON
OFF
“Reset” LED
Flash
Steady
Upper display FLASH FLASH
FLASH FLASH
Su
(Limiter
threshold)
A, B, C = Acknowledgment actions.
NOTE: Acknowledgment B has no effect.
Example 2 - C1 = Hi and C2 = 1
A, B = Acknowledgment actions.
C 3 C 3 C 3 C 3 C 3 = == == Rearm at Power-up Rearm at Power-up Rearm at Power-up Rearm at Power-up Rearm at Power-up
Auto = Automatic rearm
nAn = Manual rearm
LHL-1-NEUTRO.pmd 19/04/2004, 15.07 12