Onkyo DR-2000 - Manual (Page 16)

16 16
FIRST SETUP
TV Shape 4:3LB
Thank you for your purchase of Our DVD-Video Player.
Please make a selection
for On-Screen Language and your TV shape and
press ENTER button on your remote control.
On-Screen Language ENG
DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD AM VOLUME
INPUT
FM
TUNER PRESET
Theater-Dimensional SURROUND STEREO ACOUSTIC CONTROL
STANDBY/ON
ON
STANDBY
POWER
OFF ON
Connecting the Power/Turning on the DVD
Receiver
Before connecting
• Make sure that all the connections from pages 10 to 15 are complete (the connection to the TV is required).
• Turning on the DVD Receiver may cause a momentary power surge, which might interfere with other electrical equipment such as computers. If
this happens, use a wall outlet on a different circuit.
2
Press the POWER switch to
switch on the main power.
The DVD Receiver enters standby mode.
The STANDBY indicator lights up in red.
Notes
• To switch off the main power, press the POWER
switch again.
• The buttons on the remote controller don’t operate if
the POWER switch is set to OFF.
1
Connect the power cord (mains lead)
to a wall outlet (the mains).
INPUT SELECTOR
MODE
AU
DIO
DVD
TV
TA/MD
LIS
TEN
ING MODE
A.C
TR
L
T – D
STER
EO
SU
RR
TIT
LE MENU
SET
UP
TV/V
CR
RE
TURN
CH
TUN
VOL ENTER
REPEAT MUTING
A – B
REC
DIMMER
OPEN/CLOSE
RANDOM SLOW
SUBTITLE – ON / OFF ANGLE ZOOM
MEMORY CLEAR AUDIO DISPLAY
-- / ---
SW MODE
LATE NIGHT DISTANCE
CH SEL
T– D SETUP UP/ DOWN
TEST TONE
SP A
SP B
1 2 3
4 5 6
7 8 9
+10 0 SEARCH
STNBY ON
SLE
EP
3
Press STANDBY/ON on the DVD
Receiver or ON on the remote controller.
The DVD Receiver turns on.
The ON indicator lights up in orange.
At the same time, the STANDBY indicator goes off.
The first time you turn on the DVD Receiver, the FIRST
SETUP screen appears. In the FIRST SETUP screen, select
the On-Screen Language and TV Shape according to the
aspect ratio of the TV screen (see pages 54 and 55).
1 Press / to select “On-Screen Language,” then press
ENTER.
2 Select a language with / , then press ENTER.
3 Press to select “TV Shape,” then press ENTER.
4 Press / to select the aspect ratio of the TV screen,
then press ENTER.
5 Finally press SETUP.
All of your selections are set and the FIRST SETUP
screen disappears.
Notes
• To turn off the DVD Receiver, press STANDBY/ON on the DVD
Receiver, or STNBY on the remote controller. The DVD Receiver
enters standby mode. Be sure to set the volume to minimum before
turning off the DVD Receiver.
• You can change the above settings later with “Customizing the
Function Settings” on page 52.
↔
Before operating the cursor
Press MODE DVD or MODE AUDIO.
ENTER
ENTER
SET
UP
TV/V
CR
STANDBY/ON
ON
STANDBY
STANDBY/ON
ON
STANDBY