Onkyo DR-2000 - Manual (Page 22)

22
DVD/CD VIDEO 1 VIDEO 2 TV/LINE TAPE/MD AM VOLUME
INPUT
FM
TUNER PRESET
Theater-Dimensional SURROUND STEREO
ACOUSTIC
CONTROL
STANDBY/ON
ON
STANDBY
POWER
OFF ON
STANDBY/ON ON
STANDBY
POWER
OFF ON
Playing DVD Videos / VIDEO CDs / Audio CDs
Basic Playback
Before playing
• DVD Videos, VIDEO CDs, and audio CDs can be played with the DVD
Receiver (see “Playable Discs” on page 9). Do not play anything else.
• When playing DVD videos and VIDEO CDs, turn on the TV and set the TV
to the DVD Receiver’s input.
About the DVD , VCD , and CD marks in the pages related to
DVD video/VIDEO CD/audio CD operation
DVD
means “The function or title is related to DVD operation.”
VCD means “The function or title is related to VIDEO CD operation.”
CD means “The function or title is related to audio CD operation.”
Basic Operation
1
Press r .
The disc tray opens.
3
Press s .
The disc tray closes and playback starts.
If you press
r to close the tray after step 2, playback
may automatically start depending on the disc.
DVD If the screen on the right
appears – Screen Saver
If you pause a picture for a long while,
the screen saver operates.
To resume normal display, press
s .
(You can set this function to Off. See
page 57.)
DVD To play NTSC discs (Multisystem TV is needed)
Set “PAL/Auto” to “Auto” using the menu explained in
“Customizing the Function Settings” starting from page 52.
See page 55 for direct information.
CAUTION
Keep your fingers well
clear of the disc tray as
it is closing.
Neglecting to do so may
cause serious personal
injury.
DOLBY DIGITAL, DTS, MPEG (for MPEG2 sound),
PCM (2 channel digital stereo)
The type of the inserted disc lights.
For the other information that appears in
the display, see pages 50 and 51.
One of the indicators, which indicate the digital
sound format of the playing source, lights.
2
Place the disc on
the disc tray.
If the DVD Player is in standby mode when the button is pressed
The DVD Player turns on and the disc tray opens. In this case, it takes
several seconds until the disc tray opens.
Put the disc in the tray with the label side facing up.
There are two different disc sizes. Place the disc in
the correct guide on the disc tray.
DOLBY DIGITAL DTS MPEG PCM DVD
DVD If a title menu appears on the TV screen
The DVD video has a title menu, or the VIDEO CD is
equipped with the PBC (Playback Control) function.
Follow steps 2 and 3 in “Locating a title using the title
menu” on page 25.
For details about the PBC function, see “About VIDEO
CDs” on page 9. To start playback with or without using
the PBC function, see page 59.
DVD If a sound selection menu appears on the TV
screen
See “Enjoying the Sound Effects” on page 34 for details of
the sound systems. Select the appropriate sound using
/
/ / , then press ENTER (see the illustration of the
remote controller on the opposite page).
For example, if you need to select either “DTS” or “Stereo,”
select “DTS” since the DVD Receiver is able to reproduce
DTS (Digital Theater System) Surround sound.
CD If the sound is not reproduced from the beginning
of the disc
See the first note in the lower right corner of the opposite page.
VCD
DVD VCD CD
VCD
Lit while the input source is
the built-in DVD player.
The r (open/close), e (stop), and s (play)
buttons/lamps are lit while the DVD Receiver is
On.