Onkyo TX-SR674/674E - Manual (Page 38)

38
First Time Setup
This section explains the settings that you need to make before using the AV receiver for the very first time.
With the supplied speaker setup microphone, the
Audyssey2EQ function can measure the number of
speakers connected, their sizes, crossover frequencies,
and the distance from each speaker to the listening posi-
tion and calculate the optimal speaker settings for your
listening environment automatically.
Before using this function, connect and position all of
your speakers.
Measurement Points
To create a listening area in which several people can
enjoy home theater simultaneously, the Audyssey2EQ
function takes measurements at three points within the
listening area:
A First measurement point
This is the center point of the listening area, or the
listening position if it’s just one person.
B Second measurement point
The right side of the listening area.
C Third measurement point
The left side of the listening area.
The distances between points 1 and 2 and points 1
and 3 must be at least 1 meter.
From the examples below, choose the listening area that
best matches yours and place the microphone accord-
ingly when prompted.
Automatic Speaker Setup
(Audyssey2EQ)
TV TV TV
TV TV TV
TV TV TV
: listening area
: listening position
1 Turn on the AV receiver and the
connected TV.
On the TV, select the input to which the
AV receiver is connected.
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP RETURN
PLAYLIST/CAT PLAYLIST/CAT
RANDOM SUBTITLE
PLAY MODE
AUDIO REPEAT
RC- 651M
--/---
TAPE
M D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT D TUN
SLEEP
10 11 12
INPUT SELECTOR
HDD DVD VCR
REMOTE MODE
ZONE2
V 1
V 4
V 2 V 3
C D TAPE TUNER
DVD MULTI CH
LISTENING MODE
T V
DISPLAY
TEST TONE CH SEL
SURROUND STEREO
CINE FLTR
LEVEL+ LEVEL-
L NIGHT
VOL VOL
SAT
VCR
T V
DVD RECEIVER
C D
INPUT
+10 0 CLR
1 2 3
4 5 6
7 8 9
ENTER
CH
DISC ALBUM
3–8
2, 9
1
Note: If any of your speakers is 4 ohms, change the
minimum speaker impedance setting before running
the automatic speaker setup (see page 47).