Advanced setup —continued, Equalizer setting, Press the [setup] button. the setup menu closes – Onkyo TX-SR674/674E User Manual
Page 71
71
Advanced Setup
—Continued
Equalizer Setting
Here you can adjust the EQ of individual speakers. To set
the volume of individual speakers see page 70.
Notes:
• When the listening mode is set to Direct or Pure
Audio, no effect will be produced.
• This procedure can also be performed on the AV
receiver by using its [SETUP] button, arrow buttons,
and [ENTER] button.
1
Press the [RECEIVER] button fol-
lowed by the [SETUP] button.
The main menu appears onscreen.
2
Use the Up and Down [
]/[
]
buttons to select “4. Equalizer
Settings,” and then press
[ENTER].
The Equalizer Settings menu appears.
3
Use the Left and Right [
]/[
]
buttons to select:
Off: Tone off, response flat.
Audyssey: The tone for each speaker
is set automatically by the
Automatic Speaker Setup
function.
This setting is set automatically by the Automatic
Speaker Setup function (see page 38).
MUTING
PREVIOUS
MENU
GUIDE
TOP MENU
SETUP
RETURN
PLAYLIST/CAT
PLAYLIST/CAT
--/---
TAPE
M D/CDR
HDD
CABLE
ON/STANDBY
DIMMER
ENT
D TUN
SLEEP
10
11
12
INPUT SELECTOR
REMOTE MODE
ZONE2
V
1
V
4
V
2
V
3
C D
TAPE
TUNER
DVD
MULTI CH
T V
VOL
VOL
SAT
VCR
T V
DVD
RECEIVER
C D
INPUT
+10
0
CLR
1
2
3
4
5
6
7
8
9
ENTER
CH
DISC
ALBUM
1, 7
2-6
2
1
RECEIVER
SETUP
Be sure to select this set-
ting after having per-
formed the Automatic
Speaker Setup.
Manual: You can adjust the EQ of
each speaker manually.
If you select Manual, continue with this
procedure. If you select Off or
Audyssey, go to step 7.
4
Use the Down [
] button to
select “Channel,” and then use
the Left and Right [
]/[
] but-
tons to select a speaker.
5
Use the Up and Down [
]/[
]
buttons to select a frequency,
and then use the Left and Right
[
]/[
] buttons to adjust the
level at that frequency.
The volume at each frequency can be
adjusted from –6 to +6 dB in 1 dB
steps.
Tip: Low frequencies (e.g., 80 Hz)
affect bass sounds; high frequencies
(e.g., 8000 Hz) affect treble sounds.
6
Use the Up [
] button to select
“Channel,” and then use the Left
and Right [
]/[
] buttons to
select another speaker.
Repeat steps 5 and 6 for each speaker.
7
Press the [SETUP] button.
The setup menu closes.
4.Equalizer Settings
------------------------
a.Equalizer : Manual
------------------------
b.Channel : Front
------------------------
c. 80Hz : 0dB
d. 250Hz : 0dB
e. 800Hz : 0dB
f. 2500Hz : 0dB
g. 8000Hz : 0dB
SETUP