Onkyo TX-SR674/674E - Manual (Page 41)

41
First Time Setup —Continued
Error Messages
While the automatic speaker setup is in progress, one of
the following error messages may appear:
❏
Ambient noise is too high
This message appears if the background noise is too
loud and the measurements cannot be performed
properly. Remove the source of the noise and try
again.
Retry:
Return to step 2 and try again.
Cancel:
Cancel the automatic speaker setup.
❏
Speaker Detect Errors
One of the front speakers has not been detected.
One of the surround speakers has not been detected.
The surround back speakers have been detected but
the surround speakers haven’t.
The right surround back speaker has been detected
but the left surround back speaker hasn’t.
Make sure speakers that cannot be detected are con-
nected properly.
Retry:
Return to step 2 and try again.
Cancel:
Cancel the automatic speaker setup.
Reviewing the Results
Auto Speaker Setup
========================
Ambient noise is too
high.
Retry
Cancel
Auto Speaker Setup
========================
Speaker Detect Error:
FL:Yes FR:No
SL:--- SR:---
SBL:--- SBR:---
C:Yes SW:---
------------------------
Retry
Cancel
Auto Speaker Setup
========================
Speaker Detect Error:
FL:Yes FR:Yes
SL:Yes SR:No
SBL:Yes SBR:Yes
C:Yes SW:Yes
------------------------
Retry
Cancel
Auto Speaker Setup
========================
Speaker Detect Error:
FL:Yes FR:Yes
SL:No SR:No
SBL:Yes SBR:Yes
C:Yes SW:Yes
------------------------
Retry
Cancel
Use the Up and Down [ ]/[ ]
buttons to select the settings
that you want to review, and then
press [ENTER].
The options are:
Review SP Config:
Review the speaker configuration
settings.
Review SP Distance:
Review the speaker distance set-
tings.
Review SP Level:
Review the speaker level settings.
Auto Speaker Setup
========================
Speaker Detect Error:
FL:Yes FR:Yes
SL:Yes SR:Yes
SBL:No SBR:Yes
C:Yes SW:Yes
------------------------
Retry
Cancel
Auto Speaker Setup
========================
Save
Review SP Config
Review SP Distance
Review SP Level
Cancel
Auto Speaker Setup
========================
Review SP Config
Subwoofer :Yes
Front :FullBand
Center :80Hz
Surround :100Hz
Surr Back :150Hz
SurrBack ch:2ch