First time setup —continued – Onkyo TX-SR674/674E User Manual

Page 40

Advertising
background image

40

First Time Setup

—Continued

Notes:
• When the automatic speaker setup is complete, the

Equalizer Settings (page 71) will be set to “Audyssey.”

• You can cancel the automatic speaker setup at any

point in this procedure simply by disconnecting the
setup microphone.

5

The following screen appears.

Move the speaker setup micro-
phone to measurement point

2

(page 38), then press [ENTER].

Audyssey2EQ performs more mea-
surements. This takes a few minutes.

6

The following screen appears.

Move the speaker setup micro-
phone to measurement point

3

(page 38), then press [ENTER].

Audyssey2EQ performs more mea-
surements. This takes a few minutes.

7

When the measurements are
complete, the following screen
appears.

Use the Up and Down [

]/[

]

buttons to select an option, and
then press [ENTER].

The options are:
Next (Calculate):

Calculate the results, which takes a
few minutes, and then proceed to
the next step.

Retry:

Return to step 2 and try again.

Cancel:

Cancel the automatic speaker setup.

Auto Speaker Setup
========================
Please place microphone
at right end of
listening area at ear
height.

Push Enter:Next

Auto Speaker Setup
========================
Please place microphone
at left end of listening
area at ear height.

Push Enter:Next

Auto Speaker Setup
========================
Measuring finished.

Next[Calculate]
Retry
Cancel

8

When the calculations are com-
plete, the following screen
appears.

Use the Up and Down [

]/[

]

buttons to select an option, and
then press [ENTER].

The options are:
Save:

Save the calculated settings and exit
the automatic speaker setup.

Review SP Config:

Review the speaker configuration
settings (see “Reviewing the
Results” on page 41).

Review SP Distance:

Review the speaker distance set-
tings (see “Reviewing the Results”
on page 41).

Review SP Level:

Review the speaker level settings
(see “Reviewing the Results” on
page 41).

Cancel:

Cancel the automatic speaker setup.

9

Disconnect the speaker setup
microphone.

Auto Speaker Setup
========================
Save
Review SP Config
Review SP Distance
Review SP Level
Cancel

Auto Speaker Setup
========================

Please,unplug Setup Mic.

Advertising
This manual is related to the following products: