Optiview TRKPTZ -26NX - Manual (Page 40)

Auto Zooming Tracking Dome Camera User Manual
39
(2) Press iris Open.
(3) Move the joystick up or down to view the available
selections. Available settings include HIGH, MEDIUM, and LOW
(default). If multiple alarms with different priorities are active at
the same time, the dome will only go to the alarms with the
highest priority.
(4) Press iris Open to confirm selection.
Set alarm action:
(1) Move joystick to position the cursor beside Alarm action.
(2) Press iris Open.
(3) Move the joystick up or down to view the available
selections. Below are the settings for alarm action:
NONE: No action when alarm is triggered.
PRESET: Dome goes to the preset that is the same as the
alarm number. E.g. preset 1 will go to Alarm 1.
PATTERN 1: Dome runs pattern 1 when alarm is triggered.
PATTERN 2: Dome runs pattern 2 when alarm is triggered.
PATTERN 3: Dome runs pattern 3 when alarm is triggered.
PATTERN 4: Dome runs pattern 4 when alarm is triggered.
AUTO SCAN: Dome starts auto scan operation when alarm
is triggered.
RANDOM SCAN: Dome starts RANDOM scan operation
when alarm is triggered.
FRAME SCAN: Dome starts FRAME scan operation when
alarm is triggered.
TRACKING: Dome calls preset and start auto tracking.
Tracking function only available with the models named
TRKPTZ18XXPT, TRKPTZ22XXPT, TRKPTZ23XXPNT and
TRKPTZ26XXPNT.
(4) Press iris Open to confirm selection.