Optiview TRKPTZ -26NX - Manual (Page 42)

Auto Zooming Tracking Dome Camera User Manual
41
Figure 3.20 AUX
An auxiliary output is a programmable signal from the dome
back box that can trigger another device to operate. An auxiliary
out put is programmable to trigger from an alarm or from a
controller.
An AUX 1 command from the controller will place a ground
at the output of AUX 2 to operate the device that is connected to
it.
Setting include: 0~30secs.
An AUX 2 command from the controller will place a ground
at the output of AUX 2 to operate the device that is connected to
it.
Setting include: 0~30secs.
3.6.4 Password Setting
Move joystick to select <PASSWORD>, then press Open to
enter the password menu shown as Fig 3.21.
AUX
DWELL TIME<SECS> 1 0
DWELL TIME<SECS> 2 0
BACK
EXIT