Optiview TRKPTZ -26NX - Manual (Page 44)

Auto Zooming Tracking Dome Camera User Manual
43
3.6.5 Windows Blanking
Move joystick to select <WINDOWS BLANKING>, then
press Open to enter the windows blanking menu shown as Fig
3.23.
Figure 3.22 WINDOWS BLANKING
Window blanking enables you to program up to eight,
four-sided, user-defined areas that cannot be viewed by the
operator of the dome system. A blanked area will move with pan
and tilt functions and automatically adjust in size according to
zoom times.
Style:
The dome has two styles for window blanking, GRAY and
SMEAR. If style is set to gray, the blanked area is covered with a
solid gray window. If smear is selected images behind the
window will be noticeable but not distinguishable.
BLANK ALL ABOVE/BLANK ALL BELOW:
The dome camera has two style modes for window blanking,
GRAY and SMEAR. If style is set to gray, the blanked area is
covered with a solid gray window. If smear is selected images
behind the window will be noticeable but not distinguishable.
WINDOWS BLANKING
STYLE GRAY
BLANK ALL ABOVE OFF
BALANK ALL BELOW OFF
<SET WINDOWS>
BACK
EXIT