Olympus CAMEDIA E 10 - Manual (Page 167)

165
11
5
6 7
8
5
On the arrow pad, press or
to move the green highlight to the
date/time stamp mark
.
6
On the arrow pad, press to move
the green highlight to the right.
7
On the arrow pad, press to move
the green highlight to DATE or
TIME.
To cancel date or time stamp printing,
press
to move the green highlight to
OFF .
8
Press the button to select the
setting.
Press the button again to close the
menu. The last picture taken is displayed.
Note
• The DPOF standard permits printing either the date or time stamp (not both). You must select
either the date or time for stamping your prints.
• Selecting a large number of pictures for printing could take a long time. Before you start selecting
the a large batch of pictures for printing, check the battery check in the viewfinder and make sure
sufficient battery power is available, or if possible, connect the optional AC adapter. While selecting
pictures for printing, never switch the camera off or open the memory card cover.
If you are interrupted during picture selection for printing, you will have to start again.
• The level of DPOF compatibility is different for some printers and you could experience some
problems in printing pictures selected for printing with the print reserve features on the camera.
(
➞ 166)
• If you use index printing, you cannot stamp the prints with the date or the time.