Olympus CAMEDIA E 10 - Manual (Page 49)

47
2
To return to the shooting mode
• When mode dial is set to playback .
You cannot press the shutter button to take a picture in the playback mode. In order to resume
shooting, set the mode dial to
P , A , S , or M .
• When mode dial is set to P , A , S , or M .
You can just press the shutter button to take a picture.
Press the monitor button
and wait for the monitor display to go off.
Cannot enter playback mode?
If the card access lamp is blinking, you cannot enter the playback mode, even after setting the mode
dial to playback
. When the card access lamp goes off, the camera returns to the playback mode.
Monitor blank?
The camera will automatically power itself off if it remains idle for a specified length of time. ( ➞ 128)
The camera will switch on automatically after you start to use the camera again.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Caution
• To avoid damaging the monitor or interfering with the quality of its display, never touch or strike the
surface of the monitor.