Olympus CAMEDIA E 10 - Manual (Page 42)

40
If You Cannot Take a Picture
Message displayed in the viewfinder?
If you see Card 0 blinking in the viewfinder
The memory card is full and you cannot continue taking
pictures with the card. In order to continue shooting with the
card, you will have to remove some pictures from the card.
• Deleting Single Pictures (
➞ 51)
• Transferring Pictures to a Computer ( ➞ 167)
• Deleting All Images ( ➞ 150)
If you see Card blinking in the viewfinder, refer to the error message summary.
Appendix 5: Camera Error Messages (
➞ 189)
Four segments lit in the memory gauge?
If nothing displayed on the monitor after full-pressing the shutter button, you have to wait. The
memory gauge is divided into 4 segments. One segment lights for every image that is waiting to be
stored on the card. If all 4 segments are on, this means you cannot take another picture until at
least one of the segments in the memory gauge goes off. The amount of time required to store a
picture depends on the condition of the SmartMedia or CompactFlash card, and the record mode
setting.
Viewfinder
Control panel
Memory gauge
Control panel