Quantum Audio Travan 40 Tape Drive STT3401A - Manual (Page 121)

ATAPI Interface Chapter 5
Seagate Travan 40 Product Manual Page 113
STANDBY IMMEDIATE (ATA Command E0)
This command is accepted but performs no function. This command causes the
device to immediately enter the Standby mode.
Host Taskfile Registers—Inputs
Data Bits
Host Taskfile
Register 7 6 5 4 3 2 1 0 HEX
Features N/A N/A
Sector Count N/A N/A
Sector
Number N/A N/A
Byte Count
High N/A N/A
Byte Count
Low N/A N/A
Device/Head rsvd LBA rsvd DEV SAM LUN (not used)
Command command E0
Host Taskfile Registers—Outputs
Data Bits
Host Taskfile
Register 7 6 5 4 3 2 1 0 HEX
Error rsvd tag type (not supported) MCH ABRT EOM ILI 00
Sector Count N/A N/A
Sector
Number N/A N/A
Byte Count
High N/A
Byte Count
Low N/A
Device/Head rsvd LBA rsvd DEV SAM LUN (not used)
Status BSY RDY rsvd DSC DRQ Corr rsvd CHK 40 or 50