Quantum Audio Tape Library PX502 - Manual (Page 5)

PX502 Tape Library Quick Start Guide
5
Table 3 Library Mounting Hardware
Qty Figure Description
16 Allen head screws (M5
x 10) for shelf
assembly
PN 90-87203-01
8 T- nuts (M5)
PN 74-87575-01
4 metric
and 4
standard Rail adapters (both
metric and standard
holes are included, 8
total adapters, see
figure 6 )
PN 74-88052-01
(metric)
PN 74-88053-01
(standard)
2 Right and left support
shelves (left shown)
PN 74-88055-01
(shelf)
PN 74-88056-01
(extender)
4 sets Front and back rail
mounting hardware
(M4 x 12 allen screws
and mounting plates)
PN 74-88054-01
(plate)
PN 90-87203-03
(screws)
2 sets Back bracket hardware
(M5 x 8 allen screws
and mounting plate)
PN 74-88057-01
(bracket)
PN 90-87275-01
(screws)
2 sets Back clamp hardware
(M5 x 10 and back
clamp)
PN 90-87343-08
(screws)
PN 74-88058-01
(clamp)
Ex
ten
de
r
Sh
elf
Installing the Rack Mount Shelves 0
Before installing the rack mount shelves, you must collect
the following information:
•
Type of rack mount rails (square hole, through hole, or
threaded hole)
• Depth of rack (34 in, 86.3 cm minimum depth
recommended; however, rack depths of 24 in, 60.9 cm
to 36 in, 91.4 cm are supported)
1 Assemble the rack mount shelves (left and right):
a Determine the mounting hole locations. The holes
used to attach the two halves of the rack mount
shelves differ depending on the depth of the rack
(see
figure 4 ).