Quantum Audio Tape Library PX502 - Manual (Page 7)

PX502 Tape Library Quick Start Guide
7
Figure 6 Rail Adapter Types
d Attach the appropriate rail adapter to the front and
back of the rack mount shelves (right and left) with 2
M5 x 10 Allen screws per adapter (see
figure 7 ).
Use the rail adapters with
blocks on rails with square
hole patterns
Use the rail adapters with
circle pegs (opposite blocks)
on rails with non-threaded
circle hole patterns
Use the rail adapters with
small circle pegs on rails
with threaded circle hole
patterns (M6 on one side and
M5 on the other side)
Figure 7 Assembling the Left-
Hand Rack Mount Shelf
2 Install the left and right rack mount shelves into the
rack (the rack mount shelves adjust 27 in. to 36 in.) and
secure with the following parts in four locations (see
figure 8 ):
• Mounting plate
• 2 M4 x 12 Allen screw.
N OTE : The rack mount shelves must be installed on the
inside rack rails.
M5 x 10 Allen
screws
Rail adapter
Le
ft s
he
lf
FlexLink opening
located towards the
back for the right-
hand shelf
Arrow must
point up
M5 x 10 Allen
screws
M5 x 10 Allen
screws
Rail adapters
Righ
t sh
elf
M5 x 10 Allen
screws
Rail adapter
Arrow must
point up