Listings and specifications, Installation, Masonry and zero clearance – Quadra-Fire 1100-I User Manual
Page 6
LISTINGS AND SPECIFICATIONS
QUADRA-FIRE 1100-I pellet inserts are safety tested and listed with Warnock Hersey International to UL 1482, ULC S627, APFI,
and Oregon Administrative rules 814-23-900 through 814-23-909.
INSTALLATION
MASONRY AND ZERO CLEARANCE
A
Insert side to combustible
2” (50mm)
B
Insert top to mantel
9” (230mm)
C
Insert top to face trim
0” (0mm)
D
Insert side to face trim
0” (0mm)
E
Floor protection/hearth extension
6” (150mm)
F
Floor protection to the side of door
8” (200mm)
MINIMUM CLEARANCES TO COMBUSTIBLE MATERIALS
WHEN INSTALLED AS A BUILT-IN
A
Top of inside shroud
2” (50mm)
B
Sides of inside shroud
2” (50mm)
C
Back of inside shroud
2” (50mm)
D
Vent pipe to combustible
3” (75mm)
E
Insert side to combustible
2” (50mm)
Page 6
Noncombustible material
such as brick, tile, etc.
FASCIA OR TRIM