Quantum Instruments Splitter Boxes - Manual (Page 26)

26
Characteristics
0
IP 67 monobloc I/O splitter boxes
for fieldbuses
0
Advantys™ Distributed I/O, FTB splitter boxes
Environmental characteristics
Product certifications cULus
Temperature Operation °C (°F) 0 to + 55 (+ 32... 131)
Storage °C (°F) - 25 to + 70 (-13...+ 158)
Degree of protection Conforming to IEC 60529 IP 67
Altitude m (ft.) 0 to 2000 (0 to 6562)
Vibration resistance Conforming to IEC 68-2-6,
test Fc Hz For plastic housing 5 ≤ f ≤ 57.55 (constant amplitude = 1.5 mm)
57.55 ≤ f ≤ 500 (constant acceleration = 10 gn)
For metal housing 5 ≤ f ≤ 70 (constant amplitude = 1.5 mm)
70 ≤ f ≤ 500 (constant acceleration = 15 gn)
Shock resistance Conforming to IEC 68-2-27,
test Ea For plastic housing 30 gn, for 11 ms
For metal housing 50 gn, for 11 ms
Resistance to electrostatic
discharge Conforming to IEC 61000-4-2 kV Contact: ± 4
Air: ± 8
Resistance to radiated fields Conforming to IEC 61000-4-3 V/m 10
Immunity to fast transient
currents Conforming to IEC 61000-4-4 kV Power supply: ± 2
Signal: ± 2
Surge withstand Conforming to IEC 61000-4-5 V Power supply: (symmetrical) ± 500, (asymmetrical) ± 1000
Signals: (symmetrical) ± 500, (asymmetrical) ± 1000
Ground/PE: ± 500
Immunity to conducted
disturbance Conforming to IEC 61000-4-6 Vrms 10
Resistance to magnetic
fields, 50 Hz Conforming to IEC 61000-4-8 A/m 30
Mounting All positions
Mechanical mounting Mounting by two M4 screws for plastic housing (tightening torque 1.5 Nm / 13.3 lbf-in)
Mounting by two M6 screws for metal housing (tightening torque 9 Nm / 79.7 lbf-in)
Fieldbus characteristics
Bus type CANopen DeviceNet Profibus-DP InterBus
Structure Type EN 50325
ISO 11898 EN 50325
ISO 11898
CAN, layer 7
DeviceNet DIN 19245
EN 50170 DIN 19258
EN 50254
Access method Multimaster, priority
information Master-Slave Master-Slave,
Multi-Master Master-Slave
Transmission Binary rate 1 Mbits/s 500 kbits/s 12 Mbits/s 500 kbits/s
Medium 2 twisted, shielded
wires 4 twisted, shielded
wires 2 twisted, type A,
shielded wires
(RS 485) 3 twisted pairs with
common shielding
Fiber optic
Configuration Maximum number of devices 127 63 32 without repeater
126 with repeaters 256
Maximum length of bus At 1 Mbits/s:
- Max. tap-off length:
0.3 m (0.98 ft.)
- Max. cumulative
tap-off length: 1.5 m
(4.9 ft.)
At 500 kbits/s:
- Max. tap-off length:
6 m (19.7 ft.)
- Max. cumulative
tap-off length: 30 m
(32.8 ft.)
Main line:
- 500 m (1640 ft.)
without repeater,
- 3 km (9843 ft.)with
repeater
Tap-off:
6 m (19.7 ft.) max.
Without repeater:
At 12 Mbits/s:
- 100 m (328.1 ft.)max.
At 1.5 Mbits/s:
- 200 m (656.2 ft.)max.
At 500 kbits/s:
- 400 m (1312 ft.)max.
At < 93.75 kbits/s:
- 1.2 km (3937 ft.)max.
Main bus link
(long distance bus):
12.8 km (41,999 ft.)
Local bus link:
50 m (164 ft.)
Presentation, functions:
pages 14 - 17 Description, configuration:
pages 18 , 21, 24, References:
pages 28 - 30 Dimensions:
pages 31 - 33
Courtesy of Steven Engineering, Inc. ● 230 Ryan Way, South San Francisco, CA 94080-6370 ● General Inquiries: (800) 670-4183 ● www.stevenengineering.com