Quatech HSU-300 - Manual (Page 15)

Installing the software Quatech Freedom USB Adapter User’s Manual
Installing under Windows 2000
Follow these steps to install the Freedom USB under Windows 2000.
Step Procedure Description
Step 1 Turn on the power to your computer
system.
This is the system in which the Freedom
USB is to be installed.
Step 2 Plug the wide flat end of the USB cable
into the downstream connector.
This is the connector located on the back of
the computer of USB hub.
Step 3 Plug the square end of the USB cable into
the back of the Freedom USB box. Windows tells you that it has found new
hardware and launches the Add New
Hardware Wizard. The Found new
hardware prompt displays.
Figure 10 - Win 2000 Found new hardware prompt
Step Procedure Description
Step 4 Click the Next button. The Search for or display drivers
prompt displays.
Figure 10 illustrates the Win
2000 Found new hardware
prompt. The Found New
Hardware Wizard launches
automatically when you first
plug in the Freedom USB
serial adapter.
Page 10 Rev 2.02 (2/24/2004)