Quatech HSU-300 - Manual (Page 27)

Installing the software Quatech Freedom USB Adapter User’s Manual
Installing under Windows 98/98SE
Follow these steps to install your Freedom USB in Windows 98/98SE.
Step Procedure Description
Step 1 Turn on the power to your computer
system.
This is the system in which the Freedom
USB is to be installed.
Step 2 Plug the wide flat end of the USB cable
into the downstream connector.
This is the connector located on the back of
the computer of USB hub.
Step 3 Plug the square end of the USB cable into
the back of the Freedom USB box. Windows tells you that it has found new
hardware and launches the Add New
Hardware Wizard.
Figure 27 - Win 98/98SE Searches for new drivers prompt
Step Procedure Description
Step 4 Click the Next button. The Search or select prompt displays.
Figure 27 shows the Win
98/98SE Add New Hardware
Wizard searching for new
drivers prompt. The Wizard
launches automatically when
you first connect the Freedom
USB.
Page 22 Rev 2.02 (2/24/2004)