Building in, 2building over a kitchen unit with door, 1building over a cupboard or drawer – Tricity Bendix TBG700 User Manual
Page 19
19
ON/OFF SWITCH
FLEX
OUTLET
2
Building over a kitchen unit with
door
Proper arrangements must be taken in designing the
furniture unit, in order to avoid any contact with the bottom
of the hob which can be heated when it is operated. The
recommended solution is shown in diagram 3.
The panel fitted under the hob ("a") should be easily
removable to allow easy access if technical assistance is
needed. The space behind the kitchen unit ("b") can be
used for connections.
Dimensions are given in mm.
3
ON/OFF SWITCH
FLEX
OUTLET
1
Building over a cupboard or drawer
If the hob is to be installed above a cupboard or drawer it will be necessary to fit a heat resistant board
below the base of the hob on the underside of the work surface.
It is also recommended to carry out the electrical connection to the hob as shown in diagrams 1 and 2.
Building In