True Fitness 600R - Manual (Page 69)

Removal & Replacement 500R
Remove Front Hub Assembly (continued)
Step 6.
Twist assembly thru frame hub.
Pull assembly until clear of frame.
Step 7.
Use hammer & punch to loosen
spanner nut on bearing.
Step 8.
Remove bearing and washer by
Slipping off crank.
Copyright 2001 True Fitness Technology, Inc.
Page 67
Step 6. Twist Unit Thru Hub Frame
Step 7. Drive spanner nut off to remove bearing
Note:
Right hand thread.
Note:
Pulley and crank are a welded
assembly (cannot be separated).
Step 8. Remove Bearing & Washer