Thermador UCVM30FS - Manual (Page 4)

4
Parts Needed
❑ Blower (Remote or Integral)
❑ Tape Measure
❑ Phillips Head Screwdriver
❑ Duct Tape
❑ Ductwork (configuration varies
depending on location; See pages 7-12
for further information)
❑ Additional Sheetmetal screws
(as necessary for ductwork installation)
❑ Transition(s) (style varies depending on
ductwork)
Transition box for remote blower
installations is available as an accessory.
❑ Saw (or equivalent for cutting
countertop)
❑ #8 x 1 1/4” Wood Screws (4)
Parts Supplied
❑ Downdraft assembly (1)
❑ #8 Sheetmetal Screws (8)
❑ Blower Cord Strain Relief (1)
❑ Hardware for brackets on vent (2)
❑ Remote Blower Pigtail