Connecting, Connecting -14 – Toshiba A40 Series User Manual

Page 178

Advertising
background image

User's Manual

8-14

O

PTIONAL

D

EVICES

❑

You may not use any copyrighted video or music data copied from a video
camera except for your personal enjoyment.

❑

If you connect/disconnect an i.LINK device to/from another i.LINK device that
is currently exchanging data with the computer, data frames might be dropped.

❑

Make sure data transfer has ended or turn off the computer, before you:

• Connect/disconnect an i.LINK device to/from the computer.

• Connect/disconnect an i.LINK device to/from another i.LINK device that is

connected to the computer.

Connecting

1. Make sure the connectors are properly aligned and plug the i.LINK (IEEE1394)

cable into the computer.

Figure 8-10 Connecting the i.LINK cable

2. Plug the other end of the cable into the device.

Note the following when you use i.LINK:

❑

You may need to install drivers for your i.LINK devices.

❑

Not all i.LINK devices have been tested, therefore, compatibility with all i.LINK
devices cannot be guaranteed.

❑

Use S100, S200 or S400 cables no longer than three meters.

❑

Some devices might not support standby or automatic off functions.

❑

Do not connect or disconnect an i.LINK device while it is using an application
or when the computer is automatically shutting it down to save power. Data
might be destroyed.

Advertising