Thermador T36IB70NSP - Manual (Page 24)

24
q Attach the base panel.
i If required, the toe kick panel can be screwed to the
base panel. There are screw holes in the base panel
near the Velcro.
17. Commissioning the Appliance
To guarantee the accuracy of the following working
steps and thus the appearance of the overall kitchen
front later on, the appliance should now be operated.
q Open the appliance door.
q Press the POWER button.
Only for appliances with a water connection:
! NOTE !
In order to avoid the risk of damage caused by
leaking water from damage possibly caused to the
water pipe feeding the appliance, keep the shutĆoff
valve closed.
18. Preparing the furniture doors
! IMPORTANT NOTE !
When performing any work on the furniture doors,
always observe the following:
- Always screw into the best loadĆbearing material
of the furniture door.
- Never screw into fillers, decorative strips or similar.
- Select a screw length which is always shorter than
the thickness of the furniture front.
- To prevent damage, protect surfaces of the
furniture doors during installation.
The total weight of the furniture front must not
exceed the following values:
BM 36" (top, 1 door)
55 lbs / 25 kg
BM 36" (bottom) 22 lbs / 10 kg
The furniture fronts are attached to the appliance door
by means of fitting parts on the appliance. These fitting
parts allow the furniture door to be adjusted precisely
and attached securely to the appliance.
4.