Thermador T36IB70NSP - Manual (Page 6)

6
Installation options
The different installation options are limited only by the
design of the kitchen and the function of the finger
guard.
Individual unit
SideĆbyĆSide
* *
* Partition required!
i When 2 appliances are installed SideĆbyĆSide,
the
Basic Combination SideĆbyĆSide Sealing kit
must be used to ensure a stable connection.
See the section on Optional accessories" on
page 12.
Individual appliances with partition
1. 2.
3. 4.
i Note
- When dimensioning the partition for model 4, note
the thickness of the furniture fronts to prevent
damage if the doors are opened at the same time.
- Use the Extreme Combination SideĆbyĆSide
Heating kit if the gap between the appliances is
less than 6" (160 mm).
See the section on Optional accessories" on
page 12.
- Minimum thickness of the partition 5 /
8
" (16 mm).
At the end of the kitchen units
If one side of the appliance is visible, a side panel must
be used.
The side panel must be connected firmly to the wall,
the floor and overhead furniture/fixtures before the
appliance is placed in the cavity.
The dimensions of the side panel are taken from the
opposite cavity wall. During installation ensure that the
cavity is square and the exact size.