Thermador T36IB70NSP - Manual (Page 28)

28
q Put on the adjusting rail and align along the marks.
Mark the drill holes.
q Drill the holes.
q Screw on the adjusting rail tightly.
i Note
- Attach the adjusting rail to the furniture door with at
least 10 screws. One screw should be inserted
under each double threaded bolt.
- The adjusting rail features a variety of holes for the
many different design options of furniture doors.
Always screw into the best loadĆbearing material
of the furniture door.
23. Attaching and aligning the
furniture door
(freezer compartment)
i The double threaded bolts are responsible for
adjusting the height of the furniture front.
q Hang the furniture door on the double threaded
bolt.
q Align the furniture door with the double threaded
bolts (Torx screwdriver).
2x
2x
q Transfer the middle drill holes along the outer edge
of the appliance door to the furniture front and mark.
q Remove the furniture door.
q Mark a vertical line under the outermost fixing holes
in the adjusting rail.
q Using a square, extend the drill hole marks which
you have just made to the vertical marks.
q Mark and drill the holes.
q Screw on the fixing plates (4x).