Tiger BENGAL BRUTE JD 62-6420 - Manual (Page 38)

ASSEMBLY
Assembly Section 2-6
MAIN FRAME INSTALLATION
With an overhead hoist and / or jack-stands, raise one side of the frame up to the correctly
matching mounting holes. Install capscrews and all other hardware as shown in main frame
parts section to secure the sides of the main frame to the tractor casting, DO NOT tighten at this
time. Remove the capscrews one at a time and apply a thread locking agent. Reinsert the
capscrews and tighten / torque to values noted in the torque chart located in the maintenance
section of this manual.
(ASM-C-0003)
JOYSTICK CONTROL VALVE MOUNTING
(CAB)
Align the mounting bracket to the existing holes on top of the tractor remote valve at the rear
of the tractor. Secure the bracket to the tractor with hardware shown in the parts section of the
manual. Then place and secure the lift valve on top of the mounting bracket. Install the electrial
control cables and route the hydraulic lines from the lift valve to the hydraulic cylinders as noted
on the lift valve page of the part section.
(ASM-JD-0205)