Toshiba Starta DK Digital Telephone - Manual (Page 102)

90
Strata DK Digital Telephone 5/99
LCD Operation
Messages
System Messages 60~64
System messages 60~64 are standard messages. You can “fill in the blanks” of messages
62~64 (see below). Example: Message 64 can be edited to read
RETURN ON JAN. 4 . Callers
with LCD phones will see that message when they call your number.
System Messages 65~99
System messages 65~99 can only be programmed or permanently changed at the
Administrator’s telephone. Any messages programmed at Administrator’s telephone remain in
memory until canceled from Administrator’s telephone or until the system is reinitialized.
Station Messages
You can create up to 10 station messages (10~19). Once entered, a message can never be
deleted; only overwritten. This is a station option that is enabled in system programming.
➤
To enter/store a station message
System Message
Number
Preprogrammed message
(Max. 32 digits per message)
60 OUT TO LUNCH
61 IN A MEETING
62 CALL _____________
63 BACK AT __________
64 RETURN ON________
1. Press /&' 0VJ
6HOHFW
...or [PDN] +

.
The LCD Msg Select/[PDN] LED
flashes.
2. Enter the two-digit
message number
(10~19) to be stored.
The current message, if any, is displayed.
3. Enter the message.
(See “To enter LCD
characters” on Page
88
.)
The LCD Msg Select/[PDN] LED lights steadily, and the LCD
displays the message. The message is now stored in system
memory.
MSG NO. ?